WEFONE LED is a Dubai-based supplier of LED displays and interactive smart boards for B2B project buyers across the Middle East, Africa, and the Gulf region. This guide covers our Outdoor LED Screen line — high-brightness panels engineered for building facades, commercial districts, and transport hubs.
Built for GCC heat and sunlight
Outdoor installations in the Gulf face intense sunlight and high ambient temperatures. Our outdoor panels run at 7000 nits so content stays readable in direct sun, and are specified with steel cabinets (960×960 mm) or lightweight outdoor frames depending on the structure.
WEFONE LED outdoor models (representative)
| Model | Pixel Pitch | Module | Structure | Refresh | Brightness | Reference Market Price (AED) |
|---|---|---|---|---|---|---|
| OS-WF-P2.5 | P2.5 | 320×160 mm | Steel cabinet 960×960 mm or outdoor frame | 3840Hz | 7000 nits | 4,314 |
| OS-WF-P4 | P4 | 320×160 mm | Steel cabinet 960×960 mm or outdoor frame | 3840Hz | 7000 nits | 2,757 |
| OS-WF-P5 | P5 | 320×160 mm | Steel cabinet 960×960 mm or outdoor frame | 3840Hz | 7000 nits | 2,540 |
Prices are reference market prices (AED) per the product spec; exact project pricing depends on configuration, size, and quantity and is quoted within 48 hours.
Choosing outdoor pixel pitch
P2.5 suits closer roadside or facade viewing; P4–P5 is appropriate for larger display distances typical of building-scale billboards and DOOH. Pitch is matched to viewing distance, sunlight, and mounting structure before quotation.
Where outdoor LED fits
Building facades, commercial districts, transport hubs, and outdoor billboards across the GCC and Africa.
Specifying for Gulf Conditions
Outdoor LED in this region fails for predictable reasons, and almost all of them are specification decisions made before installation:
- Brightness. 7000 nits keeps content readable in direct sun. Anything specified for a shaded European facade will be invisible here at midday.
- Thermal management. High ambient temperature plus solar load plus the panel’s own heat. Confirm the cabinet’s operating range and ventilation path, and do not enclose a wall without airflow.
- Ingress protection. Confirm the IP rating front and rear, and that cabinet gaskets and cable glands are specified to match — most water ingress happens at cable entries, not panel faces.
- Surge and earthing. Lightning protection and proper earthing on exposed structures; this is the cheapest insurance on an outdoor project.
- Service access. Decide how a module or power supply will be replaced at height — rear access, front access, or a cradle or lift. A wall that cannot be serviced safely will not be serviced.
Facade Installations Versus Roadside DOOH
- Building facades and commercial districts: closer viewing, architectural constraints, often weight-limited structures. P2.5 is usually the right pitch where pedestrians and traffic pass within a few metres.
- Large-format DOOH and highway billboards: long viewing distances, larger area, brightness matters more than resolution. P4–P5 delivers the same impact at a materially lower cost per square metre.
What to Plan Before Installation
- Structural assessment. Wind load on the finished wall, the fixing method into the host structure, and the dead weight — a steel-cabinet wall is heavy.
- Approvals. Outdoor advertising structures generally require permission from the relevant municipality or transport authority before installation begins.
- Power and data. Dedicated circuit, weatherproof enclosure for the distribution, and a data path to the control position.
- Content and control. Confirm how content will be scheduled and whether remote monitoring is required — a wall that cannot be reached easily needs remote diagnostics.
- Maintenance plan. Cleaning cycle for dust, inspection of seals, and a stock of spare modules and power supplies.
Common Questions
Why 7000 nits rather than a lower figure?
Direct Gulf sunlight washes out anything below roughly 5000 nits. 7000 nits keeps the image readable at midday and lets the automatic brightness sensor dim the wall at night, which saves power and reduces light spill into surrounding properties.
How is heat handled inside the cabinet?
Outdoor cabinets are specified for high ambient operating temperatures with ventilation and, where required, forced cooling. Confirming the operating range against your site conditions is part of the quotation, not an afterthought.
What does the per-square-metre price include?
The reference prices cover the panels. Structure, installation and lifting equipment, control system, cabling, power distribution, approvals support and spare parts are quoted as separate line items, because they depend entirely on the site.
Frequently asked questions
Can outdoor LED screens handle GCC heat and sunlight?
Yes. WEFONE LED outdoor panels run at 7000 nits for direct-sun readability and are specified with steel cabinets or outdoor frames suited to Gulf climate conditions.
What pixel pitch should I choose for outdoor?
P2.5 for closer roadside or facade viewing; P4–P5 for larger building-scale distances typical of billboards and DOOH.
Steel cabinet or lightweight frame?
Both options are available: a 960×960 mm steel cabinet for fixed installations, or an outdoor frame for lighter structures. The choice depends on the mounting surface and service access.
Related buyer guides
Explore WEFONE LED’s other buyer guides for a complete view across indoor, outdoor, rental, and interactive display projects:
- Indoor LED Display Guide — fine-pitch panels for meeting rooms, retail, and control rooms.
- Rental & Stage LED Display Guide — fast-build cabinets for events and touring.
- Interactive Smart Board Guide — 55-98 inch collaboration displays for education and business.
- WEFONE LED FAQ — pricing, warranty, models, and supply-chain answers.
- Outdoor LED Screen — browse the product range.