Modules & Accessories
LED Modules and Power Supplies
WEFONE supplies LED display modules and the power supplies that drive them, alongside our complete range of full LED screens. If you are replacing a damaged module, upgrading an existing screen, or building a custom display, we can supply the components you need with specifications matched to your current installation.
LED Display Modules
WEFONE offers LED modules in indoor, outdoor, and rental specifications, covering pixel pitches from P1.25 for fine-pitch indoor displays up to P5 and beyond for outdoor screens. Because modules are usually matched to an existing screen's cabinet size, driver IC, and receiving card, we recommend that you provide your current screen model or a photo of the module (front and back) when requesting a quote—this lets us confirm compatibility before you order. We also supply complete modules for WEFONE's own screen ranges, so existing WEFONE customers can order direct replacements with guaranteed fit.
Power Supply Range
WEFONE supplies LED display power supplies from Changzhou Chuanglian (创联电源), a leading manufacturer of LED power supplies. Three series cover the typical power needs of LED screens, from small indoor panels to large outdoor cabinets:
| Series | Power | Output Voltage | Input | Efficiency | Cooling | Certifications |
|---|---|---|---|---|---|---|
| LDK-200-X | 200W | 3.8V / 4.2V / 4.5V / 5V | 180-264VAC | 86-88% | Natural convection | UL, CE, CB, CQC |
| A-300AB | 300W | 3.8V / 4.2V / 4.5V / 5V | 180-264VAC | 84-86% | Fan forced | IEC/EN/UL 62368, GB4943 |
| A-400AK | 400W | 2.8V / 3.3V / 3.8V / 4.2V / 4.5V / 5V | 90-132 / 176-264VAC | 81-87% | Fan forced | GB4943, UL1012 |
Choosing the Right Power Supply
LED modules are powered at low DC voltage (typically 3.8V to 5V), so each screen needs a power supply that converts mains AC to the correct DC level. Three factors determine the right supply: total power (add up the wattage of all modules in the screen), output voltage (must match the module's rated voltage), and input voltage (200-240VAC for most regions; the A-400AK also accepts 90-132VAC for 110V markets). As a rule of thumb, select a supply rated at least 30% above your calculated load to allow headroom and extend service life. The LDK-200-X series is a good fit for small indoor panels and single cabinets; the A-300AB and A-400AK series suit larger screens and outdoor cabinets where fan-forced cooling is available.
When to Order Modules or Power Supplies
Three common scenarios lead customers to order modules or power supplies separately. Replacement: a damaged module or failed power supply on an existing screen—provide the screen model or a photo and we will match the specification. Upgrade: increasing the resolution or brightness of an existing screen—we can supply higher-pitch or higher-brightness modules that fit the current cabinet. Custom build: assembling a screen from components—we supply modules, power supplies, receiving cards, and controllers, and can advise on the correct combination for your target size and resolution.
Frequently Asked Questions
What LED module specifications can WEFONE supply?
WEFONE supplies LED modules for indoor, outdoor, and rental applications, covering pixel pitches from P1.25 (fine-pitch indoor) to P5 and above (outdoor). Because modules are typically matched to an existing screen's cabinet and driver configuration, we recommend sending your current screen model or module photos when requesting a quote so we can confirm the exact specification. For WEFONE's own screen ranges we can supply guaranteed-fit replacement modules directly.
How do I identify the replacement module or power supply I need?
For a module, photograph the front (showing the pixel layout) and the back (showing the driver IC model and PCB number), measure the module dimensions in millimeters, and note the pixel pitch if visible. For a power supply, read the label on the side of the unit—it lists the output voltage (e.g. 5V), the wattage (e.g. 200W), and the input range. Send these details plus a photo through WhatsApp or email and we will confirm the correct replacement within 24 hours.
What is the minimum order quantity for modules or power supplies?
We accept single-unit orders for replacement modules and power supplies, though single-unit pricing is higher than bulk because packaging and shipping costs are fixed. For screens under maintenance, we recommend ordering at least one spare module and one spare power supply per screen so a future failure does not cause downtime. For new installations or large upgrades, volume pricing applies—contact us with your screen count and we will provide a tiered quote.
Request a Quote
Tell us what you are building or repairing—screen model, module size, pixel pitch, or power supply wattage—and we will confirm availability and pricing. WEFONE supports OEM and ODM projects as well as single-component replacement orders.
Tested per SJ/T 11141-2025 (General Specification for LED Display Screens). Tested per GB 17625.1-2022 (Limits for Harmonic Current Emissions). Tested per UL 94 V-0, PCB substrate rating. Per WEFONE specification (2026): contrast ratio 5000:1, colour temperature 3000–21000 K, viewing angle ≥160° H / ≥140° V, white-balance brightness ≥500 cd/m², operating −20 ℃~+40 ℃, MTBF ≥5,000 h. GOB encapsulation available for select models with ingress protection rating IP65 (lamp surface). Power supply safety: Tested per IEC 62368-1 (CB scheme), UL 62368-1 and CAN/CSA C22.2 No. 62368-1:19 (US/Canada), EN 62368-1 (CE), GB 4943.1 (CQC). EMC immunity: Tested per EN 61000-4-2 (ESD 8kV air/4kV contact), EN 61000-4-3 (Radiated RF 80MHz–1GHz at 10V/m), EN 61000-4-5 (Surge ±2kV CM/±1kV DM), EN 61000-4-11 (Voltage Dips 100%/0.5 cycle). Per WEFONE specification LDK-200-X (2026): input under-voltage protection at 145–165 Vac with auto-recovery, overload protection at 110%–150% rated load, short-circuit protection via hiccup mode.
Wefone ProFlex P1.5 High-Refresh LED Display Module
WEFONE ProFlex P1.5 High Refresh LED Display Module is a high-resolution indoor flexible LED display solution with 1.5mm pixel pitch…
Wefone Flexible Led display module P2.5 high refreshrate Pro
Wefone Flexible Led display module P2.5 high refreshrate Pro — premium LED display component available in Dubai from WEFONE LED.…
Wefone Flexible Led display module P1.8 high refreshrate Pro
Wefone Flexible Led display module P1.8 high refreshrate Pro — premium LED display component available in Dubai from WEFONE LED.…
P4 Outdoor Module, Refreshrate 3840Hz
P4 Outdoor Module, Refreshrate 3840Hz — premium LED display component available in Dubai from WEFONE LED. Contact us for full…
P5 Outdoor Module, Refreshrate 3840Hz
P5 outdoor LED module with 3840Hz refresh rate by WEFONE LED. High-brightness weatherproof SMD panel for outdoor advertising screens, stadium…
P1.5 Indoor Module, Refreshrate 3840Hz,
P1.5 Indoor Module, Refreshrate 3840Hz, — premium LED display component available in Dubai from WEFONE LED. Contact us for full…
P1.86 Indoor Module, Refreshrate 3840Hz
P1.86 indoor full-color LED module with 3840Hz refresh by WEFONE LED. Ultra-fine pixel pitch SMD panel for retail signage, conference…
P 2.5 Indoor Module with Masking, Refreshrate 3840Hz
P2.5 indoor LED module with masking & 3840Hz refresh by WEFONE LED. Versatile SMD panel for corporate lobbies, retail stores,…
P3 Outdoor Module, Refreshrate 3840Hz
P3 Outdoor Module, Refreshrate 3840Hz — premium LED display component available in Dubai from WEFONE LED. Contact us for full…
