Movable LED Display

Movable LED Display

Movable LED Displays: The LT-116 Series for Flexible, High-Impact Signage

Movable LED displays solve a problem fixed installations cannot: they bring a large, bright screen to where the audience is, then move on when the event is over. WEFONE's Movable LED TV line — the LT-116 series in 116-inch format — is built for exactly this. Available in three pixel-pitch versions (1.53IS, 1.86IS, and 2.5IS), the series pairs fine-pitch indoor LED modules with a mobile form factor, so a showroom, lobby, or event floor can have a premium display today and reposition it tomorrow.

This page covers how to pick the right pitch for your viewing distance, the module-level specifications behind the LT-116 series, typical use cases, and the questions buyers across the UAE and GCC ask before committing to a movable screen.

How to Choose: Pixel Pitch and Viewing Distance

For any LED screen, pixel pitch is the single most important selection factor because it determines how close viewers can stand before the image breaks down into visible pixels. The LT-116 series covers the practical indoor range:

• P1.25 — up to 2 m viewing distance: ultra-fine pitch for close-up, high-definition viewing.
• P1.53 — 2 to 3 m: high-definition close viewing; the entry point of the LT-116 series.
• P1.86 — 3 to 5 m: medium-distance viewing, the most common choice for general indoor events and presentations.
• P2.5 — 5 m and beyond: medium-to-long distance, ideal when the screen is viewed from across a room or hall.

The LT-116 series ships in 1.53IS, 1.86IS, and 2.5IS versions, covering the 2 m to 5 m+ range. If your content is mostly text and logos viewed from a few meters away, P1.86 is a safe default; if you show product close-ups or fine graphics at short range, step down to P1.53.

Refresh rate is the second decision point. The modules behind the LT-116 series run at ≥3840 Hz, and the general rule for LED displays is that high refresh (≥1920 Hz or ≥3840 Hz) eliminates the scanning lines you see when cameras film the screen. For press conferences, product launches, and broadcast-style events where the screen will be photographed or filmed, high refresh is not a luxury — it is the difference between a clean shot and a striped one.

Two more factors matter for a movable product. First, the modules use front-service design, so maintenance does not require rear access space — the screen can be serviced from the front even when placed against a wall or column. Second, GOB vacuum encapsulation is available as an option, adding protection against moisture, dust, impact, and static, with an IP65-rated module surface — a sensible upgrade for screens that travel between venues.

Reference Specifications

The LT-116 series is a 116-inch movable LED TV. Full unit-level specifications (complete-unit brightness, power draw, weight, mobile stand details, and battery runtime) are confirmed at quotation stage. The module-level specifications below describe the indoor full-color LED modules used in this class of display.

LT-116 Series Models

Unit-level specifications for each model — complete-unit brightness, power, weight, stand, and battery — are confirmed at quotation stage.

Application Scenarios

Corporate lobbies and showrooms. A movable LED TV lets a reception area double as a presentation space. Roll the LT-116 out for a product launch or a VIP visit, then move it to the showroom floor for daily content. Because the modules are front-serviceable, the screen can sit flush against a wall without sacrificing maintenance access.

Events, exhibitions, and roadshows. Trade-show booths and brand roadshows need a screen that arrives, works, and packs down fast. The 116-inch format is large enough to anchor a booth wall, and the movable form factor means one screen can serve multiple booth positions across a show — or travel to the next city.

Press conferences and product launches. When cameras are in the room, refresh rate decides whether your content looks professional on screen and in the footage. The ≥3840 Hz module refresh keeps motion clean and scan-line-free for photography and video.

Training rooms and internal comms. For companies that run sessions in different rooms, a movable screen is more flexible than a fixed wall panel: it follows the audience instead of forcing the audience to come to it.

WEFONE has delivered installations in Dubai and other markets including India, Thailand, and Malaysia — see the on-site portfolio for reference projects. For project-specific planning, share your typical viewing distance, room size, and content type with our team and we will confirm the right LT-116 configuration.

FAQ

Q1: What is the difference between design life and MTBF for LED modules?

A: They are two different metrics. The standard reliability metric for LED modules is MTBF ≥5,000 hours. The design life of the modules is 100,000 hours, which describes the expected operational lifespan under normal conditions. When comparing products, always check which metric is being quoted.

Q2: Which LT-116 model should I choose?

A: It depends on viewing distance. P1.53 suits close-range HD viewing at 2–3 m, P1.86 is the standard choice for 3–5 m, and P2.5 works for 5 m and beyond. Share your room layout and viewing distance with our team and we will recommend the right pitch.

Q3: Why does refresh rate matter for a movable LED display?

A: High refresh rate (≥1920 Hz or ≥3840 Hz) eliminates the scanning lines that appear when cameras film the screen. The LT-116 module platform runs at ≥3840 Hz, which keeps content clean for photography and video at press conferences and launches.

Q4: What is GOB encapsulation and do I need it?

A: GOB vacuum encapsulation is an optional upgrade that protects the module surface against moisture, dust, impact, and static, with an IP65-rated surface. It is a sensible choice for screens that travel between venues and face handling during setup and teardown.

Q5: How is the screen maintained?

A: The modules use front-service design, so maintenance does not require rear access space. The screen can be serviced from the front even when installed against a wall or column.

Q6: What are the operating conditions?

A: The modules operate at -20°C to +40°C with 10%–60% RH non-condensing humidity, and run on AC 100–240 V, 50/60 Hz supply.

Get a Quote

Planning to bring a large, movable display into your showroom, event, or training space? Tell us your typical viewing distance and content type — our team will confirm the right LT-116 model and configuration for your site. Message us on WhatsApp or use the Get a Quote form and we will respond with a tailored proposal.

Movable LED Displays Across the UAE

The LT-116 series is supplied and supported in all seven emirates, plus Al Ain. Because the unit arrives on a wheeled base and runs from a standard power outlet, most placements are operational the same day — no rigging permit, no structural work, and no fixed installation sign-off.

• Dubai — highest demand for exhibitions, showrooms and retail activations; units available for short-term placement from local stock.
• Abu Dhabi — government events, conferences and corporate training, often booked in multiples.
• Sharjah — education campuses and trade venues; short delivery through shared Dubai logistics.
• Ajman — single-unit placements for showrooms and clinic receptions.
• Ras Al Khaimah — resorts and waterfront venues, where the anti-glare panel holds up in brightly lit lobbies.
• Fujairah — east-coast venues; allow additional transport lead time.
• Umm Al Quwain — community and municipal events, typically one or two units.
• Al Ain — inland venues with higher summer temperatures; keep the unit out of direct sun through glazing and allow ventilation clearance behind the panel.